|
The BUBCA SystemThere is absolutely nothing like it anywhere.
"It's taken everything I've thrown at it " - SSgt MJ Kaufman USMC Presidents HundredWe've field tested it with every caliber
offered a properly functioning side ejecting semi-auto handgun and including longuns of up to 12ga. and 5.56NATO. We
have no doubt this product will handle "anything we throw at it."BUBCA I and BUBCA II.... & NOW + The
National are Proudly made in the United States of America and carries a Manufacturers Lifetime Warranty.* We take an OD GI ammocan and modify it to hold the required components during transport, then to allow the
BUBCA system to easily and quickly extend from inside the container to produce a huge capture and containment
area, and finally the funneling of the ejected brass down into the container for stowage.
| Huge Capture & Containment Area |
|
|
| BIG GULP!! |
|
|
| NEW Improved X Brace under the top-corner to corner |
When your session is complete the system quickly folds back into
the container along with your boxed ammo and expended casings for transport. Empty the casings into the brass cleaner, hands-free, and
you're clean and home free! BUBCA is ideal for the Bullseye Shooter, The Target Shooter, The Plinker,
and anyone who spends time shooting, practicing, and training will need this device. There is no substitute for a genuine brass catching machine. This system is a must for shooting ranges eveywhere where there is a need to keep the environmental
surroundings clean as possible. There is no qualification of the type and size of brass BUBCA handles, since it handles
it all.
* Don't forget that the system is adjustable,
the height can be extended as high as you need. Need not fully extend the supports if you don't need them. You may even
purchase the optional BUBCA II Backstop to use on your BUBCA I System.
**NOW..Every
BUBCA System includes two telescoping rod "support brace" and four cotter pins at no cost. All previous owners of
the PRE- BUBCA I and BUBCA II are also entitled to receive these components to help support the vertical supports in position.
We have decided to include these parts so you may have the most stable and solid free standing brass catcher system in production.
|
